Generador de Cajas
Crea cajas personalizadas para corte láser con parámetros ajustables
Dentro de cada caja tendrás la opción de solicitar la cotización sin necesidad de salir de la página
Este generadoor es avanzado y pensando para personas con conocimiento básico de vectores. Si necesitas ayuda no dudes en contactarnos aquí
Cajas
- ABox - Caja simple sin tapa
- AngledBox - Box with both ends cornered
- BasedBox - Fully closed box on a base
- BayonetBox - Round box made from layers with twist on top
- BrickSorter - Stackable nestable sorting sieve for bricks
- CardBox - Box for storage of playing cards, with versatile options
- ClosedBox - Fully closed box
- Console - Console with slanted panel
- Console2 - Console with slanted panel and service hatches
- DiceBox - Box with lid and integrated hinge for storing dice.
- DisplayCase - Fully closed box intended to be cut from transparent acrylics and to serve as a display case.
- ElectronicsBox - Closed box with screw on top and mounting holes
- EngravingFrame - A frame for an engraving ; can be either standing or hanging, both in portrait or landscape
- EuroRackSkiff - 3U Height case with adjustable width and height and included rails
- HalfBox - Configurable half of a box which can be: a bookend, a hanging shelf, an angle clamping jig, ...
- HingeBox - Box with lid attached by cabinet hinges
- IntegratedHingeBox - Box with lid and integrated hinge.
- Keypad - Generator for keypads with mechanical switches.
- NotesHolder - Box for holding a stack of paper, coasters etc
- OpenBox - Box with top and front open
- PirateChest - Box with polygon lid with chest hinges.
- Rack10Box - Closed box with screw on top for mounting in a 10" rack.
- Rack19Box - Closed box with screw on top for mounting in a 19" rack.
- Rack19HalfWidth - Half width 19inch rack unit for musical equipment.
- RackBox - Closed box with screw on top and mounting holes
- RegularBox - Box with regular polygon as base
- RegularStarBox - Regular polygon boxes that form a star when closed
- SideDoorHousing - Box with service hatches on either one or both of the sides that are locked with latches
- SideHingeBox - Box, with an hinge that does not protrude from the back of the box, and a latch.
- SlidingDrawer - Sliding drawer box
- SlidingLidBox - Box with rails for a sliding lid
- TwoPiece - A two piece box where top slips over the bottom half to form the enclosure.
- UnevenHeightBox - Box with different height in each corner
- UniversalBox - Box with various options for different styles and lids
Boxes with flex
- BreadBox - A BreadBox with a gliding door
- DoubleFlexDoorBox - Box with two part lid with living hinges and round corners
- FlexBook - Box with living hinge styled after a book.
- FlexBox - Box with living hinge and round corners
- FlexBox2 - Box with living hinge and top corners rounded
- FlexBox3 - Box with living hinge
- FlexBox4 - Box with living hinge and left corners rounded
- FlexBox5 - Box with living hinge and round corners
- HeartBox - Box in the form of a heart
- RoundedBox - Box with vertical edges rounded
- RoundedRegularBox - Regular polygon box with rounded vertical edges.
- ShutterBox - Box with a rolling shutter made of flex
- UBox - Box various options for different stypes and lids
Trays and Drawer Inserts
- CompartmentBox - Type tray variation with sliding lid
- DividerTray - Divider tray - rows and dividers
- DrillBox - A parametrized box for drills
- GridfinityBase - A parameterized Gridfinity base
- GridfinityDrillBox - A Gridfinity box for drills or similar tools
- GridfinityTrayLayout - A Gridfinity Tray Generator based on TrayLayout
- HobbyCase - A case that can be used in any hobby involving small pieces in need of organizing.
- SlantedTray - One row tray with high back wall and low front wall
- SmallPartsTray - Tray with slants to easier get out game tokens or screws
- SmallPartsTray2 - A Type Tray variant with slopes toward the front
- TrayInsert - Tray insert without floor and outer walls - allows only continuous walls
- TrayLayout - Generate a typetray from a layout file.
- TypeTray - Type tray - allows only continuous walls
Shelves
- BinTray - A Type tray variant to be used up right with sloped walls in front
- CardHolder - Shelf for holding (multiple) piles of playing cards / notes
- DiscRack - A rack for storing disk-shaped objects vertically next to each other
- DisplayShelf - Shelf with slanted floors
- PaintStorage - Stackable storage for hobby paint or other things
- SBCMicroRack - Stackable rackable racks for SBC Pi-Style Computers
- SpicesRack - Rack for cans of spices
- StackableBin - Stackable bin base on bintray
- StorageRack - StorageRack to store boxes and trays which have their own floor
- StorageShelf - StorageShelf can be used to store Typetray
- WineRack - Honey Comb Style Wine Rack
WallMounted
- DinRailBox - Box for DIN rail used in electrical junction boxes
- KeyHolder - Wall organizer with hooks for keys or similar small items
- RollHolder - Holder for kitchen rolls or other rolls
- SkadisBoard - Customizable Ikea like pegboard
- WallCaliper - Holds a single caliper to a wall
- WallChiselHolder - Wall tool holder for chisels, files and similar tools
- WallConsole - Outset and angled plate to mount stuff to
- WallDrillBox - Box for drills with each compartment with a different height
- WallEdges - Shows the different edge types for wall systems
- WallHopper - Storage hopper with dispensing tray
- WallPinRow - Outset and angled plate to mount stuff to
- WallPlaneHolder - Hold a plane to a wall
- WallPliersHolder - Bar to hang pliers on
- WallRack - Wall mountable rack for spices or other items
- WallRollHolder - Holder for kitchen rolls or other rolls
- WallSlottedHolder - Wall tool holder with slots
- WallStackableBin - A wall-mounted bin that can stack or hang from a wall.
- WallStairs - Platforms in different heights e.g. for screw drivers
- WallTypeTray - Type tray - allows only continuous walls
- WallWrenchHolder - Hold a set of wrenches at a wall
Hole patterns
- FanHole - Hole pattern for mounting a fan
- FrontPanel - Mounting Holes and cutouts for all your holy needs.
- HolePattern - Generate hole patterns in different simple shapes
- NemaPattern - Mounting holes for a Nema motor
- SevenSegmentPattern - Holepatterns and walls for a seven segment digit
Parts and Samples
- BurnTest - Test different burn values
- ConcaveKnob - Round knob serrated outside for better gripping
- FillTest - Piece for testing different settings for hole filling
- FlexTest - Piece for testing different flex settings
- FlexTest2 - Piece for testing 2D flex settings
- GearBox - Gearbox with multiple identical stages
- Gears - Gears
- LBeam - Simple L-Beam: two pieces joined with a right angle
- LaserHoldfast - A holdfast for honey comb tables of laser cutters
- NemaMount - Mounting bracket for a Nema motor
- Planetary - Planetary Gear with possibly multiple identical stages
- Pulley - Timing belt pulleys for different profiles
- RectangularWall - Simple wall with options for different edges
- RobotArm - Segments of servo powered robot arm
- TriangularWall - Simple wall with options for different edges
- WavyKnob - Round knob serrated outside for better gripping
- ZBeam - Z-Beam (or U-Beam): three pieces joined at right angles
Misc
- AgricolaInsert - Agricola Revised Edition game box insert, including some expansions.
- AirPurifier - Housing for the Nukit Open Air Purifier
- AllEdges - Showing all edge types
- AngledCutJig - Jig for making angled cuts in a laser cutter
- Arcade - Desktop Arcade Machine
- Atreus21 - Generator for a split atreus keyboard.
- BeeQueenTransportBox - Box to hold Bee Queen Transport Cages
- BirdHouse - Simple Bird House
- BookHolder - Angled display stand for books, ring files, flyers, postcards, or business cards.
- BottleStack - Stack bottles in a fridge
- BottleTag - Paper slip over bottle tag
- CanStorage - Storage box for round containers
- CarbonFilter - Compact filter for activated char coal pellets
- Clock - Clock (old style with clock hands)
- CoffeeCapsuleHolder - Coffee capsule holder
- CoinBankSafe - A piggy-bank designed to look like a safe.
- CoinDisplay - A showcase for a single coin
- Desksign - Simple diagonal plate with stands to show name or message.
- DiceTower - Tool for fairly rolling dice
- Dispenser - Dispenser for stackable (flat) items of same size
- Display - Display for flyers or leaflets
- DrillStand - Box for drills with each compartment of a different height
- FatBallDispenser - Birdhouse for fat balls.
- FilamentSpool - A two part spool for 3D printing filament
- Folder - Book cover with flex for the spine
- Hook - A hook with a rectangular mouth to mount at the wall
- JointPanel - Create pieces larger than your laser cutter by joining them with Dove Tails
- Kamishibai - Kamishibai butai (japanese image theatre)
- LaptopStand - A simple X shaped frame to support a laptop on a given angle
- LaserClamp - A clamp to hold down material to a knife table
- MagazineFile - Open magazine file
- MakitaPowerSupply - Bench power supply powered with Maktia 18V battery or laptop power supply
- Matrix - WS2812b matrix enclosure
- NightLightBox - Simple decorative lamp with creatively laser cut plates
- OttoBody - Otto LC - a laser cut chassis for Otto DIY - body
- OttoLegs - Otto LC - a laser cut chassis for Otto DIY - legs
- OttoSoles - Foam soles for the OttO bot
- PaperBox - Box made of paper, with lid.
- PhoneHolder - Smartphone desk holder
- PhotoFrame - 3-layer photo frame with a slot at the top to slide matboard/acrylic/glass over the photo after glue-up.
- PizzaShovel - Pizza shovel with conveyor belt action
- PoleHook - Hook for pole like things to be clamped to another pole
- RoyalGame - The Royal Game of Ur
- SevenSegmentClock - Seven segment clock build with LED stripe
- Shadowbox - The frame and spacers necessary to display a shadowbox / lightbox.
- Shoe - Shoe shaped box
- Sphere - Actually not a sphere, but a hosohedron. Also not actually a box, but a globe, lamp, ornament or whatever you want it to be.
- Spool - A simple spool
- Stachel - Bass Recorder Endpin
- Tetris - 3D Tetris shapes
- TrafficLight - Traffic light
- TriangleLamp - Triangle LED Lamp
Unstable
- Castle - Castle tower with two walls
- OrganPipe - Rectangular organ pipe based on pipecalc
- Planetary2 - Balanced force Difference Planetary Gear (not yet working properly)
- Platonic - Platonic solids generator
- Rotary - Rotary Attachment for engraving cylindrical objects in a laser cutter
- Silverware - Cuttlery stand with carrying grip using flex for rounded corners